TEKNOZINC 90 SE A

Zinc rich epoxy paint

  • Corrosion protective
  • 2-component
  • Primer

TEKNOZINC 90 SE A is a two-pack solvent-borne zinc rich epoxy paint.

Used as a priming coat in polyurethane, chlorinated rubber and epoxy coating systems.

Protects efficiently steel from underfilm corrosion and resists weathering even without any top coat. The paint comes up to the specifications of both standard EN-ISO 12944-5 and the reference book 'Boverkets handbok om stålkonstruktioner (BSK99)'. The paint has been approved for use in nuclear power plants in Scandinavia and comes up to the specifications of TBY (Technical regulations for surface treatment). The zinc content of the paint is at least 90% by weight in the dry paint film.

Technical data sheet

Solids abt. 53 % by volume
Total mass of solids abt. 2100 g/l
Volatile organic compound (VOC) abt. 450 g/l
Pot life 16 h (+23 °C)
Mixing ratio 5:1 by volume (comp. A : comp. B)
Hardener Comp. B: TEKNOZINC 90 SE A HARDENER
Gloss Matt
Drying time – dust free after 5 min
Drying time – touch dry after 30 min
Thinner TEKNOSOLV 9506
Clean up TEKNOSOLV 9506
Approvals & certificates Boverkets handbok om stålkonstruktioner (BSK07),EN ISO 12944-5,TBY