TEKNOPOX FILL is a two-pack, solvent-free stopper based on epoxy resin.
Intended to be used for stopping up pitted steel and porous concrete surfaces subjected to heavy abrasion.
TEKNOPOX FILL is easy to apply. It can also be used on vertical surfaces, because it does not run or sag. The product has CE approval for protection of concrete structures.
|Solids||abt. 100 % by volume|
|Total mass of solids||abt. 1000 g/l|
|Volatile organic compound (VOC)||abt. 0 g/l|
|Pot life||20 min (+23 °C)|
|Mixing ratio||1:1 by volume (comp. A : comp. B)|
|Hardener||Comp. B: TEKNOPOX FILL HARDENER (black)|
|Drying time – dust free||after 6 h|
|Drying time – fit for light traffic||after 16 h|
|Drying time – fully cured||after 7 days|
|Clean up||TEKNOSOLV 9506|