INERTA 51 is a two-pack solvent-borne epoxy reactive paint.
The paint is used as primer or intermediate coat in chemical resistant epoxy coating systems K17. Also suitable for use on concrete.
The paint film is very dense and provides good resistance to water and chemicals. The paint has good resistance to heat - even damp heat. The paint comes up to the specifications of Swedish Standard SSG 1021-GA
|Solids||abt. 50 % by volume|
|Total mass of solids||abt. 970 g/l|
|Volatile organic compound (VOC)||abt. 440 g/l|
|Pot life||6 h (+23 °C)|
|Mixing ratio||4:1 by volume (comp. A : comp. B)|
|Hardener||Comp. B: INERTA PRIMER 3/INERTA 51 HARDENER|
|Drying time – dust free||after 1 h|
|Drying time – touch dry||after 5 h|
|Drying time – fully cured||after 7 d|
|Curing time||KP (metal temperature)|
|Clean up||TEKNOSOLV 9506|
|Approvals & certificates||SSG 1021-GA|