INFRALIT EP/PE 8093-08

Conductive epoxy/polyester powder

  • Conductive (ESD)
  • Powder coating

INFRALIT EP/PE 8093-08 is a powder coating based on mixture of epoxy and polyester resin, which at elevated temperatures melts, cures and forms a conductive paint film.

Developed for areas within the electronics industry where static electricity forms a problem.

The surface resistance of INFRALIT EP/PE 8093-08 is conductive 0 - 0,5 MOhm measured at a film thickness of about 70 µm and with 100 voltage. The resultant paint film that has very good mechanical properties, such as abrasion resistance, impact resistance and elasticity.

Recommended film thickness 70 ± 20 µm. Too thick films are to be avoided, as they weaken the special properties.
Spraying TRIBO/CORONA
Curing time 15 min/180°C (metal temperature)
Gloss value 50-70