TEKNOPOX PRIMER 87-00 MIOX

Epoxy Primer

  • Corrosion protective
  • Intermediate
  • 2-component
  • Primer
  • Solvent-borne

TEKNOPOX PRIMER 87-00 MIOX is a MIO pigmented, thixotropic, high solid, epoxy primer, cured in temperatures above -10ºC.

The paint is used for priming of steel or concrete constructions operating in sea, coastal and industrial environment; for priming steel, cast iron or concrete constructions exposed to destructive mechanical factors.

The semi-matt, hard coating, with good adhesion to surfaces and resistant to mechanical factors. The coating resistant to atmospheric conditions. Exposed to direct sun radiation, the surface may chalk or change the shade.

Solids abt. 80 % by volume
Total mass of solids abt. 1450 g/l
Volatile organic compound (VOC) abt. 250 g/l
Pot life 1,5 h (+23 °C)
Mixing ratio 100:23 by volume (comp. A : comp. B)
Hardener Comp. B: TEKNOPOX HARDENER 7377
Drying time – dust free after 45 min
Drying time – touch dry after 2 h
Drying time – fully cured after 5 days
Thinner If needed (eg. thickening of product, application in lower temperature, application in lower dry film thickness) use TEKNOSOLV 564 or TEKNOSOLV 9506 up to 15%.
Clean up TEKNOSOLV 564 lub TEKNOSOLV 9506