TEKNOPOX PRIMER 7-00

Fast Drying Epoxy Primer

  • Corrosion protective
  • Intermediate
  • 2-component
  • Primer
  • Solvent-borne

TEKNOPOX PRIMER 7-00 is a fast curing two-pack epoxy primer containing anticorrosive pigments (zinc phosphate). The product cures also in low temperatures (above -10ºC).

The paint is used as anticorrosive coating, primer or intermediate coat in painting systems suited for fast recoating with another layer or in automated painting systems.

The very smooth, matt surface, hard, mechanically resistant and well attached to subjects. The surface is resistant to atmospheric conditions. Exposed to direct sun radiation, the surface may chalk or change the shade.

Technical data sheet

Pot life 3 h (+23 °C)
Mixing ratio 100:14 by volume (comp. A : comp. B)
Hardener Comp. B: TEKNOPOX HARDENER 7377
Drying time – dust free after 15 min
Drying time – touch dry after 45 min
Drying time – fully cured after 5 days
Thinner Not needed. IF needed (eg. rise in viscosity) use TEKNOSOLV 564 or TEKNOSOLV 9506.
Clean up TEKNOSOLV 564 lub TEKNOSOLV 9506