INFRALIT EP/PE 8087-30

Epoxy/polyester primer

INFRALIT EP/PE 8087-30 is a powder coating based on a mixture of solid epoxy and polyester binders. At elevated temperatures the powder will melt, cure and form the final paint film.

Suitable as one layer paint for coating metal industry products, such as lighting fixtures, apparatuses, wire gratings and refrigerating fixtures.

INFRALIT EP/PE 8087-30 Epoxy/Polyester Powder forms a film with mechanical and chemical resistance and good anticorrosive properties. On outdoor exposure Epoxy/Polyester Powders have a tendency towards matting down (chalking) similar to that of pure epoxies. On the other hand, its tendency to yellow on overbaking and exposure to heat and ultraviolet light is minor as compared with epoxy powders. INFRALIT EP/PE 8087-30 is also suitable for use as a primer under another INFRALIT powder coating. A paint system of two coats provides a thicker protective layer and facilitates the coating of sharp edges. System is also suitable for outdoor objects which are exposed to UV light when a suitable weather resistant INFRALIT powder coating is chosen as a top coat. Group M1 in Emission Classification of building materials. IMO FTPC Part 5 - Test for Surface Flammability and IMO FTPC Part 2 - Smoke and toxicity test.

Gloss Matt
Recommended film thickness When painting with two coat system the optimal film thicknesses should be defined case-specifically by test paintings. A suitable basis is abt. 70 µm for each paint coat.
Spraying CORONA
Curing time 10 min/180°C (metal temperature)
Approvals & certificates IMO FTPC Part 2,IMO FTPC Part 5,M1 classification
Gloss value 20-55