DRYWOOD VERF VOOR HOUT INDUS GL
Water borne hybrid primer, intermediate and topcoat
- Special adhesion
- UV resistant
- Top coat
Drywood VVH Indus GL 111000-00, a water borne, industrial primer, intermediate and topcoat for exterior wooden cladding.
Drywood VVH Indus GL 111000-00 can be applied by all conventional spraying systems - both hand spraying and automated spraying systems. Drywood VVH Indus GL 111000-00 will typically be applied as primer, intermediate and topcoat on substrates such as softwood, hardwood, Accoya and modified wood. All softwood and non-durable hardwood for exterior use should be treated with Drywood Improstain colour D765.
Drywood VVH Indus GL 111000-00 is available in opaque colour shades, and can be supplied as bases for on-site tinting or as factory tinted products. Drywood VVH Indus GL 111000-00 is a highly versatile, robust and easy to use primer, intermediate and topcoat, which typically is used for exterior claddings. The wood lengths should be stacked with a suitable foil between them so there is no contact between the painted surfaces. This should also be done when the wood is restacked. The wood must be transported and stored dry, free of weathering and at least 15 cm above the ground. This also applies at all times during installation.
|Volatile organic compound (VOC)||See Safety Data Sheet.|
|Theoretical spreading rate||approx. 10 m2/l at 35 µm dry film thickness|
|Density||abt. 1.1 g/ml|