TEKNOLAC PRIMER 2275-10L

Alkyd primer

  • Corrosion protective
  • 1-component
  • Primer
  • Solvent-borne

Fast drying alkyd primer.

Primer for rotors - / stator component from ventilators.

Fast drying, good corrosion protection, for use in automatic Suitable for spraying, heavy metal free.

Surface preparation

Remove from the surface any contaminants that might be detrimental to surface preparation and coating. Remove also water-soluble salts by using appropriate methods. The surface should be prepared as follows: STEEL SURFACES: Remove the skin and rust by blasting until Degree of preparation Sa 2½ (ISO 8501-1) Roughening of thin sheet metal surfaces Improves the adhesion of the paint to the substrate. OLD, OVERLATABLE SURFACES: Contaminants containing the (E.g., fats and salts). The surface should be Dry and clean. Old color surfaces showing the maximum Overcoating interval have to be roughened additionally.
Solids abt. 45 % by volume
Volatile organic compound (VOC) abt. 470 g/l
Gloss Matt
Recommended film thickness The recommended minimum film thickness is 30 µm dry film.
Drying time – dust free after 20 min
Drying time – touch dry after 1 h
Drying time – forced drying 50°C / 30 min
Thinner TEKNOSOLV 6750
Clean up TEKNOSOLV 6750