TEKNOLAC 2246

Alkyd one coat

  • Corrosion protective
  • 1-component
  • Single coat paint
  • Solvent-borne

TEKNOLAC 2246 is an air-drying one-coat paint based on alkyd resin. Contains corrosion protection pigments.

Can be used as a one-coat for steel for indoor and outdoor areas.

A fast drying primer with good corrosion protection. Good sagging resistance.

Technical data sheet

Safety data sheet

Surface preparation

Remove from the surface any contaminants that might be detrimental to surface preparation and coating. Remove also water-soluble salts by using appropriate methods. The surface should be prepared as follows: STEEL SURFACES: Remove the skin and rust by blasting until Degree of preparation Sa 2½ (ISO 8501-1) Roughening of thin sheet metal surfaces Improves the adhesion of the paint to the substrate. OLD, OVERLATABLE SURFACES: Contaminants containing the (E.g., fats and salts). The surface should be Dry and clean. Old color surfaces showing the maximum Overpainting interval exceeded, are also roughened become. The place and the time of preparation are to be chosen so that the prepared Surface is not dirty before the subsequent surface treatment or Is moist.
Solids abt. 46 % by volume
Volatile organic compound (VOC) abt. 460 g/l
Gloss Matt
Recommended film thickness The recommended maximal film thickness is 80 µm dry film.
Drying time – dust free after 30 min
Drying time – touch dry after 90 min
Thinner TEKNOSOLV 6746
Clean up TEKNOSOLV 6746