TEKNOFLOOR 400F

Epoxy varnish

  • Intermediate

TEKNOFLOOR Colour Sand Screed consists of solvent-free, two-pack TEKNOFLOOR 400F Epoxy Varnish and a mixture of coloured sand. The Screed is applied in a thickness of 4 - 6 mm.

TEKNOFLOOR Colour Sand Screed is used for floors subjected to heavy abrasion or attacked by strong chemicals or hot water. Suitable areas of application are floors in food and meat processing plants, pulp and paper mills, chemical plants and dairies.

TEKNOFLOOR Colour Sand Screed has excellent abrasion resistance due to its thick coat and high sand content. The surface of the coating is not slippery. In accordance with the Classification Standard SFS-EN 13501-1:2002 (Technical Research Centre of Finland, research Report RTE 4314/04) TEKNOFLOOR Colour Sand Screed's fire conduct is in category Bfl and the smoke formation is in category s1. The paint has CE approval for protection of concrete structures. TEKNOFLOOR 400F is suitable for use in food preparation and packaging environments (Smithers Rapra, Certificate Number GC0071).

Technical data sheet

Other product specific documents

Solids abt. 100 % by volume
Total mass of solids abt. 1100 g/l
Volatile organic compound (VOC) abt. 0 g/l
Pot life 15-30 min. (+23 °C)
Mixing ratio 2:1 by volume (comp. A : comp. B)
Hardener Comp. B: TEKNOFLOOR HARDENER 400H
Drying time – fit for light traffic after 24 h
Drying time – fully cured after 7 days
Clean up TEKNOSOLV 9506
Approvals & certificates CE marking,Smithers Rapra,VTT (Finland)