TEKNOPOX FILLER 2112

Epoxy stopper

TEKNOPOX FILLER 2112 is a two-pack, nearly solvent-free epoxy stopper based on epoxy resin.

For stopping up primed or blast-cleaned steel and aluminium plate surfaces, especially on large steel surfaces. Also suitable for concrete surfaces as a stopper and to fill the pores.

The stopper is easy to work with and its adhesion to roughened steel surface or to a surface primed with epoxy coating is very good. The stopper cures fast and it can be sanded down the same day.

Solids abt. 94 % by volume
Total mass of solids abt. 980 g/l
Volatile organic compound (VOC) abt. 60 g/l
Pot life 60 min (+23 °C)
Mixing ratio 1:1 by volume (comp. A : comp. B)
Hardener Comp. B: TEKNOPOX HARDENER 7217
Drying time – dust free after 1.5 h
Drying time – touch dry after 2.5 h
Drying time – fit for sanding after 4 h
Drying time – fully cured after 4 d
Clean up TEKNOSOLV 9506 or TEKNOSOLV 6060