- Prefabrication primer
KORRO SE is a two-pack prefabrication primer based on epoxy resin and zinc dust.
The paint is used as a temporary protection on blast-cleaned steel.
KORRO SE has good resistance to abrasion, heat, oils and several types of solvents.
|Solids||abt. 40 % by volume|
|Total mass of solids||abt. 1800 g/l|
|Volatile organic compound (VOC)||abt. 550 g/l|
|Pot life||24 h (+23 °C)|
|Mixing ratio||12:7 by volume (comp. A : comp. B)|
|Hardener||Comp. B: KORRO SE HARDENER|
|Drying time – dust free||after 2 - 3 min|
|Drying time – touch dry||after 4 - 5 min|
|Clean up||TEKNOSOLV 9514 (Korro Solv) or TEKNOSOLV 9506 (Teknoplast Solv)|