TEKNOFLOOR 100F

Concrete paint and varnish

  • 2-component
  • Primer
  • Solvent-borne
  • Top coat

TEKNOFLOOR 100F is a two-pack epoxy paint for concrete floors.

Used for concrete floors whenever an abrasion-resistant paint coat is required. When good colour and gloss retention is required TEKNOFLOOR 100F can be overcoated with TEKNODUR 0100 -series polyurethane top coats.

The product has CE approval for protection of concrete structures.

Technical data sheet

Other product specific documents

Solids abt. 48 % by volume
Total mass of solids abt. 700 g/l
Volatile organic compound (VOC) abt. 480 g/l
Pot life 6 h (+23 °C)
Mixing ratio 3:1 by volume (comp. A : comp. B)
Hardener Comp. B: TEKNOFLOOR HARDENER 100H
Gloss Gloss
Tinting system Teknomix
Drying time – fit for light traffic after 12 h
Thinner TEKNOSOLV 9506
Clean up TEKNOSOLV 9506
Approvals & certificates CE marking