INERTA MASTIC

Epoxy coating

  • Corrosion protective
  • Wear resistant
  • 2-component
  • Primer
  • Solvent-borne

INERTA MASTIC is a two-pack, low-solvent content epoxy reactive paint.

To repair of existing coating on steel in Coating Systems K41, K46, K56 and K60 when environmental conditions do not allow blast-cleaning, and for brush application when a dense coat is required in a single operation. The paint is also suitable for application in engineering shops.

Good adhesion to wire-brushed steel. Good resistance to chemicals and water. Provides good adhesion for top coats. For the product there is also available a WINTER-hardener INERTA MASTIC WINTER HARDENER, which is used when the painting is done in temperatures below +10°C. Also INERTA MASTIC-01 HARDENER can be used in order to have a longer overcoating interval. Please see the technical data sheet of INERTA MASTIC-01 HARDENER for detailed information.

Technical data sheet

Safety data sheet

Solids abt. 80 % by volume
Total mass of solids abt. 1200 g/l
Volatile organic compound (VOC) abt. 210 g/l
Pot life 2 h (+23 °C)
Mixing ratio 2:1 by volume (comp. A : comp. B)
Hardener Comp. B: INERTA MASTIC HARDENER
Gloss Semi-matt
Drying time – dust free after 4 h
Drying time – touch dry after 6 h
Thinner TEKNOSOLV 9506
Clean up TEKNOSOLV 9506