TEKNOTOP 2980-00

Topcoat for spray application

  • Water-borne
  • Topcoat

TEKNOTOP 2980-00 is a water-borne, industrial topcoat for wooden balcony parts. Leaves a flexible surface with extra UV-protection.

TEKNOTOP 2980-00 can be applied by all conventional spraying systems - both hand spraying and automated spraying systems. TEKNOTOP 2980-00 will typically be applied on pre-treated substrates such as softwood, hardwood, Accoya or modified wood.

TEKNOTOP 2980-00 has been developed especially for application on horizontal surfaces, but can also be applied on vertical surfaces, and thus it can also be applied on garden furniture, playground equipment etc.

Surface preparation

The wood must be free from wood dust and contamination. The moisture content of the wood should be approx. 13% and should not exceed 15%. Pretreatment is required for wood substrates not meeting Durability Class 3, EN 350:2016. Teknos has a range of preservative products meeting the requirements of EN 599-1, please contact Teknos for further guidance.

Application conditions

Stir thoroughly before use. Optimum temperature for products and surroundings: +18°C - +22°C. Optimum relative air humidity: Approx. 50%. Wet film range 175-200 µm.


Storage temperature is +5°C - +30°C. Shelf life in unopened containers: See “Best before date” on the label. Keep containers tightly closed after use.
Volatile organic compound (VOC) abt. 15 g/l
Gloss Semi-matt
Tinting system Teknocolor;Teknoshade
Theoretical spreading rate 5-6 m²/l
Clean up Water.
Colours Base T (translucent colours).
Packages Available in a range of standard pack sizes.
Safety markings See safety data sheet.