TEKNOLUX AQUA 1728-35
Water borne UV-enamel
Water borne UV-curing enamel.
Surface treatment of primed pine, spruce, MDF, HDF and chipboards for use indoors.
Quick drying and UV-curable after evaporation of water. After UV-curing the enamel is hard-wearing and resistant equal to traditional AC-lacquers.
|Volatile organic compound (VOC)||See Safety Data Sheet.|
|Recommended film thickness||75-125 g/m²|
|Drying time – fully cured||Drying at 20 °C / 50 % RH: 30 min. + UV-light. Drying at 50 °C / 50 % RH: 5 min. + UV-light.|
|Curing time||20 (metal temperature)|
|Clean up||TEKNOCLEAN 1949 or water.|