TEKNOLUX AQUA 1728-33
Water borne UV-enamel
- Enamel
- Water-borne
Water borne UV-curing enamel.
Surface treatment of primed pine, spruce, MDF, HDF and chipboards for use indoors.
Quick drying and UV-curable after evaporation of water. After UV-curing the enamel is hard-wearing and resistant equal to traditional AC-lacquers.
Technical data sheet
Safety data sheet
- TEKNOLUX AQUA 1728-33_BASE 3_2020-03-18_IE_en
- TEKNOLUX AQUA 1728-33_BASE 3_2020-03-18_UK_en
- TEKNOLUX AQUA 1728-33_NCS S 0500-N_2019-03-07_IE_en
- TEKNOLUX AQUA 1728-33_NCS S 0500-N_2019-03-07_UK_en
- TEKNOLUX AQUA 1728-33_NCS S 0502-Y_2019-03-07_IE_en
- TEKNOLUX AQUA 1728-33_NCS S 0502-Y_2019-03-07_UK_en
- TEKNOLUX AQUA 1728-33_NCS S 7500N_2018-12-20_IE_en
- TEKNOLUX AQUA 1728-33_NCS S 7500N_2018-12-20_UK_en
- TEKNOLUX AQUA 1728-33_RAL 1021_2019-03-07_IE_en
- TEKNOLUX AQUA 1728-33_RAL 1021_2019-03-07_UK_en
- TEKNOLUX AQUA 1728-33_RAL 9003_2019-03-07_IE_en
- TEKNOLUX AQUA 1728-33_RAL 9003_2019-03-07_UK_en
- TEKNOLUX AQUA 1728-33_RAL 9010_2019-03-07_IE_en
- TEKNOLUX AQUA 1728-33_RAL 9010_2019-03-07_UK_en
- TEKNOLUX AQUA 1728-33_RAL 9016_2019-03-07_IE_en
- TEKNOLUX AQUA 1728-33_RAL 9016_2019-03-07_UK_en
- TEKNOLUX AQUA 1728-33_RAL 9017_2020-08-07_IE_en
- TEKNOLUX AQUA 1728-33_RAL 9017_2020-08-07_UK_en
- TEKNOLUX AQUA 1728-33_TS 0001_2020-03-23_IE_en
- TEKNOLUX AQUA 1728-33_TS 0001_2020-03-23_UK_en
- TEKNOLUX AQUA 1728-33_TS 20740 WHITE_2019-03-07_IE_en
- TEKNOLUX AQUA 1728-33_TS 20740 WHITE_2019-03-07_UK_en
Other product specific documents
| Volatile organic compound (VOC) | See Safety Data Sheet. |
|---|---|
| Tinting system | Teknocolor |
| Recommended film thickness | 75-125 g/m² |
| Drying time – fully cured | Drying at 20 °C / 50 % RH: 30 min. + UV-light. Drying at 50 °C / 50 % RH: 10-15 min. + UV-light. Drying at 80 °C / 50 % RH: 5-7 min. + UV-light. |
| Curing time | 20 (metal temperature) |
| Thinner | Water |
| Clean up | TEKNOCLEAN 1949 or water. |