Silicon top coat

  • Heat resistant
  • 1-component
  • Solvent-borne
  • Top coat


Topcoat for metals with tested corrosions protection.

Teknoheat 1179-01 has a tested resistance according to customers specification.

Surface preparation

Remove from the surface any contaminants that might be detrimental to surface preparation and coating. Remove also water-soluble salts by using appropriate methods. The place and time of the preparation are to be chosen so that the prepared surface will not get dirty or damp before the subsequent treatment.
Solids abt. 47 % by volume
Volatile organic compound (VOC) abt. 440 g/l
Gloss Gloss
Recommended film thickness The recommended maximal film thickness is 30 µm dry film.
Drying time – forced drying 230-250°C / 15-20 min
Thinner TEKNOSOLV 6740-30
Clean up TEKNOSOLV 6740-30