TEKNOFLOOR

UNCOATED CONCRETE FLOORS are to be at least one month old. Clean the surfaces from dense laitance by etching with RENSA ETCHING Etching liquid and allow the surfaces to dry. Brittle and powdery surfaces must always be gleaned by grinding. Remove oil and grease with solvent TEKNOSOLV 1621. Brush the floor or clean with vacuum-cleaner to remove the dust. Prime the surface with paint diluted by 20 % with TEKNOSOLV 1621 and finish with one coat of undiluted paint. UNPAINTED WOODEN FLOORS: Clean the floors from grease, dirt and dust. Fill dents and cracks with SILORA A Carpentry Filler. Prime with paint diluted by 10% with TEKNOSOLV 1621 and finish with one coat of undiluted paint. PREVIOUSLY PAINTED FLOORS: Scrape or sand off all loose paint. Matt down old paint coats by sanding. Clean the surfaces from grease, dirt and dust. Prime bare spots with diluted paint and finish with a full coat of undiluted paint. Before use stir the paint thoroughly. Apply the paint by brush, roller or spray. Use airless spray nozzle 0.013 - 0.017".

The surface to be painted must be dry. During the application and drying period the temperature of the ambient air, the surface and the paint shall be above +10 °C and the relative air humidity below 80 %.

The painted surface reaches its final hardness and washability within 3 - 4 weeks. Rough handling and washing is to be avoided during this period. Stained surfaces can be cleaned with a moist cleaning cloth or mop. Use a neutral detergent. Very dirty surfaces can later be cleaned with a slightly alkaline universal washing detergent.