TEKNOBLADE REPAIR 9000-10
Elastomeric coating
TEKNOBLADE REPAIR 9000-10 is a two component solvent-free elastomeric coating designed for dispenser gun application.
Intended for use as a repair product for refurbishment of Leading Edge Protection on Wind Turbine Blades.
TEKNOBLADE REPAIR 9000-10 withstands impacts and hard abrasion. It will cure down to a temperature of 5 °C. The coating will chalk and yellow when exposed to UV-light. When a surface with good colour retention is desired, the surface needs to be overcoated. TEKNOBLADE REPAIR 9000-10 is usually applied in 2-3 mm thickness.
Technical data sheet
Safety data sheet
Other product specific documents
| Pot life | 120 sec. (+23 °C) |
|---|---|
| Mixing ratio | 1:1 by volume (comp. A : comp. B) |