Gloss furniture paint

  • Wear resistant
  • Water-borne

Water-borne urethane alkyd based top coat for detached and fixed furniture indoors and outdoors. Finish: gloss.

Indoors FUTURA AQUA 80 is suitable for primed and previously with alkyd paint painted wood, metal and building board surfaces: doors, window casements, cabinets, mouldings, panels, panel ceilings, air ducts, staircase railings, radiators and piping systems. Outdoors FUTURA AQUA 80 is suitable for painting primed window casements, doors, garden furniture etc. Indoors FUTURA AQUA 80 is also suitable for plaster and filler surfaces primed with FUTURA AQUA 3 Primer, for example window sills and casings, and wall surfaces in special objects, e.g. staircases.

Surface preparation

Clean new surfaces from dust and dirt. Wash previously painted surfaces with RENSA SUPER paint cleaner. Matt down hard or gloss surfaces by sanding and thereafter remove the dust. Smooth any irregularities in the surface with SILORA A carpentry filler.


Wood, wood fibre board and building board surfaces as well as galvanized metal surfaces are painted with FUTURA AQUA 3 Primer. Rusting steel surfaces as well as aluminium and copper surfaces are primed with FERREX AQUA anticorrosive paint. Before use stir the paint thoroughly. The paint is thinned with water 5 - 15 % by volume when needed. Apply the paint once or twice with a varnish brush, mohair roller, painting pad or spray. When painting a smooth surface, e.g. flush door, the marks left by a roller may be smoothed down with painting pad or with varnish brush. Airless spray nozzle 0.011 - 0.013".

Application conditions

The surface to be painted must be dry. During the application and drying period the temperature of the ambient air, the surface and the paint shall be above +10 °C and the relative air humidity below 80 %. Drying is faster in low air humidity and/or above + 21 °C. Application will be easier if air is humidified and/or temperature is lowered in the working space. Ventilation after the painting will quicken the drying.


Must not freeze.
Solids abt. 40 % by volume
Volatile organic compound (VOC) EU VOC limit value (kat A/d): 130 g/l. The product´s VOC: max. 130 g/l.
Gloss Gloss
Tinting system Teknomix
Density abt. 1.2 g/ml
Practical spreading rate 8 - 10 m²/l
Drying time – dust free 1 h
Drying time – through-dry 2 - 3 days
Drying time - overcoatable 14 h
Thinner Water.
Clean up Wash the equipment immediately after use with appropriate detergent and warm water.
Colours Base paints 1 and 3, which can be tinted to obtain the shades in Interior Colour Cards.
Packages Base paints 1 and 3: 0,45 L, 0,9 L, 2,7 L.
Safety markings See Safety Data Sheet. NOTE! Because of the danger of self-ignition, any waste from the product, spray mist and soiled rags etc. are to be kept in a fire-proof place in air-tight containers. Immersion in water is also recommended.
Approvals & certificates M1 classification,Finnish Key Flag