Epoxy Tank Coating
- Chemical resistant
- DTM (direct-to-metal)
High solid epoxy paint, thixotropic, two component, cured with amines.
For protection of inside linings of fuel, sewage, ballistic and storage tanks, steel and concrete constructions operating in corrosion aggressive environment, where high decorative value of coating is not required. For protection of constructions in the ground, where the risk of petroleum derivatives or solvent exists. For priming of steel constructions operating in chemically aggressive environment.
High gloss, hard coating, with good adhesion to surfaces and resistant to mechanical factors. Coating resistant to water, salt and alkali solutions, oil, fuel oil, heating oil, diesel, motor gasoline, ethyl gasoline, unleaded petrol, aviation fuel, ethyl glycol, glycerine and xylene. When exposed to sun radiation, the tint of the coating may change without impairing the properties.
|Solids||abt. 75 % by volume|
|Total mass of solids||abt. 1670 g/l|
|Volatile organic compound (VOC)||abt. 200 g/l|
|Pot life||2 h (+23 °C)|
|Mixing ratio||100:30 by volume (comp. A : comp. B)|
|Hardener||Comp. B: EPITAN 70 UTWARDZACZ|
|Drying time – dust free||after 6 h|
|Drying time – touch dry||after 7 h|
|Drying time – fully cured||after 7 days|
|Clean up||TEKNOSOLV 564|