DRYWOOD WOODSTAIN VV SG
Water borne semi-film building acrylic modified oil
- Low-temperature curing
- Water resistant
- Wood stain
Drywood Woodstain VV 082001-00, a water borne industrial primer, intermediate and topcoat for new exterior softwooden cladding and glulam.
Drywood Woodstain VV 082001-00 can be applied by all conventional spraying systems - both hand spraying and automated spraying systems - and by vacuumcoater, brush or roller. Drywood Woodstain VV 082001-00 will typically be applied as a primer, intermediate and topcoat on substrates such as softwood, Accoya and modified wood. All softwood and non-durable hardwood for exterior use should be treated with a wood preservative. It is recommended that Accoya intended for outdoor use is treated before priming with Drywood Improstain. Exterior durability of coating systems including Drywood Woodstain VV 082001-00 is typically documented according to BRL0821.
Drywood Woodstain VV 082001-00 is available in opaque and translucent colour shades, and can be supplied as bases for on-site tinting or as factory tinted products. Drywood Woodstain VV 082001-00 is a highly versatile, robust and easy to use primer, intermediate and topcoat, which typically is used for fine sawn softwood in exterior cladding and glulam. The wood lengths should be stacked with a suitable foil between them so there is no contact between the painted surfaces. This should also be done when the wood is restacked. The wood must be transported and stored dry, free of weathering and at least 15 cm above the ground. This also applies at all times during installation.
|Solids||abt. 25 % by volume|
|Volatile organic compound (VOC)||abt. 45 g/l|
|Volatile organic compound (VOC)||See Safety Data Sheet.|
|Theoretical spreading rate||approx. 10 m2/l at100 g/m2 wet film thickness|
|Density||abt. 1.07 g/ml|
|Approvals & certificates|