TEKNOWALL 05

Full-matt interior paint

Water-borne acrylate dispersion paint for interior use. Low side sheen, rich consistency and excellent hiding power.

Suitable for use on interior walls and ceilings in apartments and offices. TEKNOWALL 05 can be applied to concrete, plaster, filler, brick and various building board surfaces. It is also suitable for repainting of old alkyd and dispersion paint surfaces.

Technical data sheet

Safety data sheet

Surface preparation

Clean new surfaces from dust and dirt. Wash previously painted surfaces with RENSA SUPER paint cleaner. Matt down hard or gloss surfaces by sanding and thereafter remove the dust. Remove all of the old paint from the surfaces which have been painted with glue paint or lime wash. Spray filler ceilings, which are not waterproof, are recommended to be primed with solvent borne primer e.g. FUTURA 3 Adhesion primer. For smoothing of irregularities in the surface choose a suitable filler from the TEKNOSPRO series. The dried filler is sanded down and the dust removed. Paint concrete, plaster, filler, brick, chipboard, gypsum board and fibre board surfaces straight on with TEKNOWALL 05 or prime with TEKNOPRIMER 03 primer. Steel surfaces are primed with FERREX AQUA Anticorrosive paint.

Application

Before use stir the paint thoroughly. The paint is thinned with water when needed. Apply once or twice by brush, roller or spray. Suitable nozzle for airless spray is 0.017 - 0.021".

Application conditions

The surface to be painted has to be dry. During the application and drying period the temperature of the ambient air, the surface and the paint shall be above +5°C and the relative air humidity below 80%. Good ventilation during the application and drying period quickens the drying process.

Maintenance

The final forming of the paint film takes abt. 4 weeks under normal circumstances and after that the ultimate durability and hardness is reached. Before this the painted surface must be treated with care. The painted surface can be cleaned by wiping with a neutral (pH 6 - 8) detergent. Detergent and dirt are removed by wiping and/or rinsing the surface with clean water. Use a cleaning cloth, soft sponge or similar for cleaning. Avoid coarse brushing or heavy abrasion. Follow the dilution and other instructions of the detergent producer when using detergents.

Storage

Must not freeze.
Solids abt. 39 % by volume
Volatile organic compound (VOC) EU VOC limit value (kat A/a): 30 g/l. The product's VOC: max. 30 g/l.
Gloss Matt
Tinting system Teknomix
Density abt. 1.4 g/ml
Practical spreading rate Previously painted surface: 7 - 10 m²/l. Filler and wood fibre board: 6 - 8 m²/l. Concrete and plastered surface: 5 - 7 m²/l.
Drying time – dust free after ½ h
Thinner Water
Clean up Wash the equipment immediately after use with detergent and warm water.
Packages Base paint 1 and 3: 2,7 L, 9 L. NCS S 0500-N: 10 L, 120 L. NCS S 0502-Y: 10 L.
Safety markings See Safety Data Sheet.
Approvals & certificates M1 classification
Gloss value 6- 8