- Special adhesion
Water-borne alkyd based insulation primer for indoor use. Finish: full-matt.
Used for previously painted and unpainted soiled concrete, stopper and building board surfaces which can not be washed or otherwise cleaned before top coating. For walls and ceilings as well as doors, windows and other fixed furniture indoors in dry and humid spaces and in wet rooms. TIMANTTI STOP efficiently insulates and fixes discolourations caused by soot, nicotine and e.g. water damages. Surfaces insulation primed with TIMANTTI STOP can be top coated with all Teknos interior paints which otherwise suit the object in question. TIMANTTI STOP is white and full-matt and hence can be used also as a top coat e.g. on ceilings.
Technical data sheet
Safety data sheet
Other product specific documents
|Solids||abt. 40 % by volume|
|Volatile organic compound (VOC)||EU VOC limit value (kat A/i): 140 g/l. The product´s VOC: max. 140 g/l.|
|Density||abt. 13 g/ml|
|Practical spreading rate||7 - 10 m²/l|
|Drying time – dust free||after 1 hour|
|Clean up||Water. Wash the equipment immediately after use with appropriate detergent and warm water.|
|Packages||0,9 L, 2,7 L, 9 L, 18 L|
|Safety markings||See safety data sheet. NOTE! Because of the danger of self-ignition, any waste from the product, spray mist and soiled rags etc. are to be kept in a fire-proof place in air-tight containers, alternatively the waste is to be burned. Immersion in water is also recommended.|
|Approvals & certificates||M1 classification|