Epoxy Tank Coating
- Corrosion protective
- DTM (direct-to-metal)
Ecological, modified epoxy paint, thixotropic, low solvent content, cured with amines.
For protection of inside linings of potable and industrial water tanks.
High gloss, hard coating with good adhesion to surfaces and resistant to mechanical factors. Coatings resistant to water, wine, beer, fruit juices, must, fat and edible oils. Coating resistant to methyl isobutyl ketone, xylene, citric acid, diluted and concentrated alkali solutions, demi water and vegetable oil.
|Solids||abt. 90 % by volume|
|Total mass of solids||abt. 1560 g/l|
|Volatile organic compound (VOC)||abt. 100 g/l|
|Pot life||30 min (+23 °C)|
|Mixing ratio||100:47 by volume (comp. A : comp. B)|
|Hardener||Comp. B: EPITAN 95 UTWARDZACZ|
|Drying time – dust free||after 4 h|
|Drying time – touch dry||after 18 h|
|Drying time – fully cured||after 7 days|
|Thinner||Not needed. In exceptional circumstances use TEKNOSOLV 693|
|Clean up||TEKNOSOLV 564|