Camouflage clear varnish
- UV resistant
- Wear resistant
- Clear coat
TEKNODUR 0210 camouflage clear varnish is a two-pack polyurethane varnish. The hardener is an aliphatic isocyanate resin.
Used as a finishing clear varnish on steel and metal surfaces in INERTA 70 camouflage painting systems. It is suitable to use specially on cars and other transport equipment.
TEKNODUR 0210 camouflage clear varnish forms a full-flat film that has good resistance to ultraviolet radiation and mechanical abrasion.
Technical data sheet
|Solids||abt. 45 % by volume|
|Total mass of solids||abt. 490 g/l|
|Volatile organic compound (VOC)||abt. 530 g/l|
|Pot life||6 h (+23 °C)|
|Mixing ratio||4:1 by volume (comp. A : comp. B)|
|Hardener||Comp. B: TEKNODUR HARDENER 0200 STA|
|Drying time – dust free||after 1 h|
|Drying time – touch dry||after 6 h|
|Thinner||Standard thinner: TEKNOSOLV 9526|
|Clean up||TEKNOCLEAN 6496|