INFRALIT EP/PE 8087-18
- Powder coating
INFRALIT EP/PE 8087-18 is a powder coating based on a mixture of solid epoxy and polyester binders. At elevated temperatures the powder will melt, cure and form the final paint film.
Suitable for coating metal industry products, such as lighting fixtures, apparatuses, wire gratings and refrigerating fixtures.
INFRALIT EP/PE 8087-18 Epoxy/Polyester Powder forms a film with mechanical and chemical resistance and good anticorrosive properties which are almost equal to those of epoxies. On outdoor exposure INFRALIT EP/PE 8087-18 Epoxy/Polyester Powder has a tendency towards matting down (chalking) similar to that of pure epoxies. On the other hand, its tendency to yellow on overbaking and exposure to heat and ultraviolet light is minor as compared with epoxy powders. Among special properties of INFRALIT EP/PE 8087-18 is improved levelling. It is particularly suitable for coating thinner paint films than normal. Group M1 in Emission Classification of building materials. IMO FTPC Part 5 - Test for Surface Flammability and IMO FTPC Part 2 - Smoke and toxicity test.
|Recommended film thickness||Directive film thickness 25 - 60 µm.|
|Curing time||15 min/180°C (metal temperature)|
|Approvals & certificates||IMO FTPC Part 2,IMO FTPC Part 5,M1 classification|