TEKNOCOAT AQUA SEALER 231-123
Waterborne pigmented sealer
- Water-borne
- Sealer
- Water-borne
- Sealer
This product is recommended for industrial coating of wood-based substrates. This basecoat for roller application serves as a base for further coatings with TEKNOS waterborne printing inks and TEKNOS UV topcoats. This product is free from VOC. By using the appropriate layer design and drying conditions, it is possible to achieve chemical resistance R4 / R7 according to IOS-MAT-0066.
Technical data sheet
Surface preparation
This product was especially developed for the application on preprimed wood-based substrates.
Please consult our technical staff prior to other applications.
Application
Stir thoroughly before use.
Apply by roller coater, with a shore hardness of preferably 40 - 50 shore (Isobutylen/Isopren-Copolymer or EPDM-Prepolymer).
Intermediate drying after each layer is recommended.
Application conditions
The recommended application temperature is +20 – +35°C.
Storage
Storage and transportation temperature is +25 ± 5°C. Storage stability is 1 year in unopened package. Protect from heat and freeze!
Jet dryer i.e. IR-dryer.
Adjustment of drying parameters according to film weight and line speed is necessary. A preliminary test of the complete build-up is recommended.
| Volatile organic compound (VOC) | abt. 0 g/l |
|---|---|
| Thinner | If needed the product can be diluted with water. For the amount of dilution, please contact our technical service. |
| Clean up | Water. Wash the equipment immediately after use. |
| Safety markings | See safety data sheet. |