GROLASOL 1209-10
Water-borne 1C top coat for interior use
- 1-component
- Water-borne
- Topcoat
GROLASOL 1209-10 is a water-borne 1C top coat for interior finishing and can be used on all woods. The product is also suitable for processing wood containing tannins and delays wood yellowing. The coating does not release any formaldehyde, monomers or similar irritant substances.
Technical data sheet
Surface preparation
Every substrate must be well-cleaned, dry and free from grease and oil. Coating removal: Sand
Application
Stir or shake the product well for several minutes before use, if necessary by machine.
Application conditions
Recommended temperature for surroundings and product: +15°C-25°C. Do not apply below +10°C.
Maintenance
Do not clean surfaces which are coated with GROLASOL 1209 with strong alkaline cleaning agents.
Storage
Storage temperature is +5°C - +30°C. Store in a tightly closed container.
| Volatile organic compound (VOC) | abt. 40 g/l |
|---|---|
| Tinting system | Largo |
| Density | abt. 1.01 g/ml |
| Drying time – dust free | after 20 minutes |
| Drying time – touch dry | after 40 minutes |
| Drying time – through-dry | after 3 days |
| Clean up | Wash the equipment immediately after use. REINIGER 5064-98 or ACETON 8000-98. |
| Colours | Available in all RAL and NCS-S colours or at your request. |
| Safety markings | See safety data sheet. |
| Gloss value | 10 |