DRYWOOD WOODSTAIN VV MATT
Water-borne primer / intermediate / topcoat
- Low-temperature curing
- Water resistant
- Water-borne
- Intermediate
- Primer
- Topcoat
- Wood stain
- Low-temperature curing
- Water resistant
- Water-borne
- Intermediate
- Primer
- Topcoat
- Wood stain
DRYWOOD WOODSTAIN VV MATT is a water-borne low-filmbuilding product for non-dimensional stable applications such as exterior wood constructions, wood sidings or cladding and wooden sheds.
DRYWOOD WOODSTAIN VV MATT gives excellent colouration of the wood with translucent colours. For semi-opaque colours, the wood structure is less visible. The product has good penetration into the wood, good adhesion on natural wood species, and forms a thin film layer in two or more layers. The product is water-repellent and does not chalk.
Surface preparation
The wooden surface must be dry, carefully sanded and cleaned from dust and other impurities.
Application
Stir thoroughly before use.
Application conditions
The product should be used above +8°C with maximum 70% RH.
Typical use is 70-80 g/m²/ 60-70 g/m² / 20-30 g/m² on planed wood and 120-130 g/m² / 70-80 g/m² / 20-30 g/m² on sanded/sawn wood
Storage
Shelf-life minimum 6 months in unopened and closed packaging. Keep containers tightly closed after use. Must not freeze.
| Solids | abt. 25 % by volume |
|---|---|
| Volatile organic compound (VOC) | abt. 15 g/l |
| Gloss | Matt |
| Tinting system | Teknocolor |
| Theoretical spreading rate | Approx. 10 m²/l at 100 g/m² film thickness. |
| Density | abt. 1.07 g/ml |
| Drying time – through-dry | Minimum 48 h Drying times at 15 °C and 60 % R.H. at 100 g/m2: repaintable after approx. 2 hours; drying time min. 48 hours. |
| Thinner | The product is delivered ready for use. |
| Clean up | Water. |
| Colours | Available in almost any translucent and semi-opaque colour. |
| Packages | Available in a range of standard pack sizes. |
| Safety markings | See safety data sheet. |
| Approvals & certificates | KOMO Certificate BRL 0821 (33296) |