AQUAFINE 8336-20
Water-borne 2C top coat for interior use
- 2-component
- Water-borne
- Clear coat
- Topcoat
- 2-component
- Water-borne
- Clear coat
- Topcoat
AQUAFINE 8336-20 is a water-borne 2C top coat that creates a sophisticated finish. The coating is resistant to household chemicals including cleaning and disinfectant agents. The coating is ring-resistant and has a high resistance to metal abrasion, also without recoating.
Technical data sheet
Surface preparation
Every substrate must be well-cleaned, dry and free from grease and oil. Coating removal: Sand, strip
Application
Stir or shake the product well for several minutes before use, if necessary by machine.
Application conditions
Recommended temperature for surroundings and product: +15°C-25°C. Do not apply below +10°C.
Storage
Storage temperature is +5°C - +30°C. Store in a tightly closed container.
Note:
When applying a white or pastel-coloured coating to surfaces subject to considerable wear we recommend overcoating with 2C clear coatings to improve ring resistance (metal wear).
| Volatile organic compound (VOC) | abt. 69 g/l |
|---|---|
| Pot life | 2-3 h (+23 °C) |
| Hardener | Comp. B: HYDROPUR 7515-99 |
| Tinting system | Largo;Teknocolor |
| Theoretical spreading rate | 100 g/m²; 10 m²/kg |
| Density | abt. 1.18 g/ml |
| Mixing ratio by weight | 10:1 |
| Drying time – dust free | after 60 minutes |
| Drying time – touch dry | after 3-4 hours |
| Drying time – through-dry | after 16 hours |
| Clean up | Wash the equipment immediately after use. |
| Colours | Colourless. Available in all RAL and NCS-S colours or at your request. |
| Safety markings | See safety data sheet. |
| Approvals & certificates | EN 71-3,Swiss environmental label UE II, class C |
| Gloss value | 20 |