1. Teknos Americas
  2. Industrial
  3. Products
  4. Global products
  5. ABZIEHLACK LM 1938-00

ABZIEHLACK LM 1938-00

Solvent-based 1C peelable coating

»
  • 1-component
  • Solvent-borne
  • Ancillary products

ABZIEHLACK LM 1938-00 creates an elastic coating film for temporary protection of bright metallic machine parts, tools etc. during transport and storage. The product is used as a protective coating to prevent moisture exposure and mechanical stress as well as for the protection of metal surfaces, e.g. in galvanic processes or in spray booths.

Surface preparation

Every substrate must be well-cleaned, dry and free from grease and oil.

Application

Stir or shake the product well for several minutes before use, if necessary by machine.

Application conditions

Recommended temperature for surroundings and product: +15°C-25°C. Do not apply below +10°C.

Storage

Storage temperature is +5°C - +30°C. Store in a tightly closed container.

Notes: For good peelability, 2-3 coats should be applied "wet-on-wet" (> 100 µm dry film thickness). Surfaces coated with peelable coatings may not be exposed to weathering, otherwise the peelability will be lost. The product is unsuitable for protecting coated surfaces. The organic solvents contained in the product may attack coatings, resulting in an adhesive bond.
Theoretical spreading rate 520 g/m²; 1.9 m²/kg
Density abt. 0.95 g/ml
Drying time – dust free after 10 minutes
Drying time – touch dry after 60 minutes
Drying time – through-dry after 60 minutes
Thinner OWEDUR 5046-98
Clean up Wash the equipment immediately after use. OWEDUR 5046-98 or OWECELL D 1500-98.
Colours White.
Safety markings See safety data sheet.