OLICLEAN 123
Cleaner
- Detergent
- Detergent
Cleaning agent in the form of a concentrate for professional use. Clear liquid, a mixture of mild alkaline substances and emulsifiers. Does not cause corrosion. Soluble in water in any proportions. Very good cleaning properties already at 1% concentration. It creates foam. OLICLEAN 123 is designed for washing and degreasing metal structures prior surface preparation and application of protective coatings. It can also be successfully used for cleaning and degreasing object in the machine industry, mechanical and car workshops also for internal and external cleaning of means of transport.
Technical data sheet
Application
It may be used in the wide range of concentrations. Depending on the sensitivity of the surface, the type and degree of soiling and the cleaning technique used, it is recommended to prepare aqueous solutions in concentrations of 1 to 10 %. For washing zinc and aluminium surfaces, use only solutions. Contact of these surfaces with the solution should not last longer than 10 minutes. Solutions of cleaning agent can be applied either by hand using a brush, as well as by means of a spray. After application, allow it to penetrate the surface contamination at approximately 10 - 15 minutes, and then rinse with clean water. Do not allow the solution to dry on the surface to be cleaned. Increasing the temperature of the solution (to 80 °C) improves the efficiency and speed of cleaning. Use at temperatures above 0 °C.
Storage
The storage stability is shown on the label. Must be stored tightly closed and kept cool and dry.
| Volatile organic compound (VOC) | abt. 21 g/l |
|---|---|
| Density | abt. 1 g/ml |
| pH | 10.7 |
| Safety markings | See Material Safety Data Sheet. Contains: C10 Alcohol ethoxylate 3 - 5%, dipropylene glycolmethylether 1-3 %, non-ionic surfactants - < 5 % and amphoteric surfactants – < 5 %. Freezing point - 0°C, Boiling point - 100°C. |