BIORA 4
Matt wall paint
- Water-borne
- Water-borne
Water-borne acrylate paint intended for use on interior walls and ceilings.
It is easy to apply and produces a matt, even film. BIORA 4 can be applied onto concrete, plaster, stopper, brick and building board surfaces.
Safety data sheet
Other product specific documents
Surface preparation
Clean new surfaces from dust and dirt. Wash previously painted surfaces with RENSA SUPER paint cleaner. Matt down hard or gloss surfaces by sanding and thereafter remove the dust. Remove all of the old paint from the surfaces which have been painted with glue paint or lime wash. For smoothing of irregularities in the surface choose a suitable filler from the SILORA series. The dried filler is sanded down and the dust removed.
Application
Stir thoroughly before use. Apply once or twice. Reserve a sufficient amount of paint in the same vessel for each uniform surface. Colour differences will thus be avoided.
Application conditions
The surface to be treated must be dry. During the application and drying period the temperature of the ambient air, the surface and the product shall be above +5°C and the relative air humidity below 80%. Good ventilation during the application and drying period quickens the drying process.
Storage
Must not freeze.
Suitable airless nozzle size 0.017 - 0.021".
| Solids | abt. 38 % by volume |
|---|---|
| Volatile organic compound (VOC) | EU VOC limit value (cat A/a): 30 g/l. The product's VOC: max. 30 g/l. |
| Gloss | Matt |
| Tinting system | Teknomix |
| Density | abt. 1.4 g/ml |
| Practical spreading rate | Previously painted surface: 10 - 12 m²/l. Filler and wood fibre board: 7 - 10 m²/l. Concrete and plastered surface: 4 - 7 m²/l. |
| Drying time – dust free | ½ h |
| Thinner | Water. |
| Clean up | Wash the equipment immediately after use with detergent and warm water. |
| Colours | Base paints 1 (white) and 3, which can be tinted to obtain the shades in Interior Colour Card. |
| Safety markings | See safety data sheet. |
| Approvals & certificates | Finnish Key Flag,M1 classification |
| Gloss value | 4-5 |