- Immersion resistant
- Wear resistant
TEKNOPUR 300-800 is a two-pack, solvent-free elastomeric coating. Coating is applied by spraying. TEKNOPUR 300-800 is based on pure polyurea.
Intended for use as waterproofing for bitumen roofs and concrete structures and as a coating for surfaces which require abrasion resistance e.g. transport wagons.
TEKNOPUR 300-800 withstands impacts, hard abrasion, chemicals and constant immersion in water. It will cure also in -20°C temperature. Coating yellows due to the impact of UV-light. When a surface with good colour retention is desired, the surface needs to be overcoated with e.g. TEKNODUR polyurethane top coat. The coating is usually applied to 500 - 3000 µm thickness. Fire resistance class Efl for floorings. For objects subjected to chemical immersion using colour Light grey is recommended.
|Solids||abt. 100 % by volume|
|Total mass of solids||abt. 1120 g/l|
|Volatile organic compound (VOC)||abt. 0 g/l|
|Pot life||5 sec. (+23 °C)|
|Mixing ratio||1:1 by volume (comp. A : comp. B)|
|Hardener||Comp. A: TEKNOPUR HARDENER 7245|
|Drying time – touch dry||after about 12 sec|
|Drying time – fully cured||after about 1 d|
|Clean up||TEKNOCLEAN 6496, TEKNOCLEAN 6481|
|Approvals & certificates||CE marking|