VARIVA SOLVA 8776-00 SPRAY
Solvent-based spray stain
- Solvent-borne
- Stain
- Solvent-borne
- Stain
VARIVA SOLVA 8776-00 SPRAY spray stain is a solvent-based, ready-to-use, light-fast pigment stain that gives surfaces an elegant, levelling and therefore uniform appearance.
Technical data sheet
Safety data sheet
- VARIVA SOLVA 8776-00 SPRAY_2022-07-26_GB_en
- VARIVA SOLVA 8776-00 SPRAY_2024-01-16_EU_en
- VARIVA SOLVA 8776-00 SPRAY_2024-01-16_IE_en
- VARIVA SOLVA 8776-00 SPRAY_2024-01-16_MT_en
- VARIVA SOLVA 8776-00 SPRAY_2024-01-16_NI_en
- VARIVA SOLVA 8776-00 SPRAY_2025-06-03_EU_en
- VARIVA SOLVA 8776-00 SPRAY_2025-06-03_IE_en
- VARIVA SOLVA 8776-00 SPRAY_2025-06-03_MT_en
- VARIVA SOLVA 8776-00 SPRAY_2025-06-03_NI_en
Surface preparation
Every substrate must be well-cleaned, dry and free from grease and oil. Coating removal: Sand, strip
Application
Stir or shake the product well for several minutes before use, if necessary by machine.
Application conditions
Recommended temperature for surroundings and product: +15°C-25°C. Do not apply below +10°C.
Storage
Storage temperature is +5°C - +30°C.
Application methods
Before commencing work always test the product on the original wood. The shade depends on several factors such as the wood characteristics, wood shade, sanded finish etc. Spongy and irregular woods as well as end grain should be treated with BEIZAUSGLEICH 0634-00 beforehand. Apply BEIZAUSGLEICH 0634-00 liberally, do not remove excess, allow to dry, do not sand.
Stains must always be fixed and protected with at least one coat of a clear coating. No intermediate sanding should be carried out before priming. The final colour shades are only obtained after priming, intermediate sanding and final coating with a clear coating and after drying at least overnight.
| Volatile organic compound (VOC) | abt. 809 g/l |
|---|---|
| Tinting system | Largo |
| Density | abt. 0.88 g/ml |
| Drying time – dust free | after 15 minutes |
| Drying time – touch dry | after 15 minutes |
| Clean up | Wash the equipment immediately after use. VERDÜNNER 1000-98 or UNIVERSALREINIGER U 8600-98. |
| Colours | Can be adjusted individually for customers by agreement. |
| Safety markings | See safety data sheet. |