OBJEKTSIEGEL 4555-30
Water-borne 1C floor sealing coating for interior use
- 1-component
- Water-borne
- Sealer
- 1-component
- Water-borne
- Sealer
OBJEKTSIEGEL 4555 is a water-borne, abrasion-resistant 1C floor sealing coating for low-emission, odourless treatment of wood parquet floors and stripped floor boards. The product is resistant to light and yellowing.
Technical data sheet
Surface preparation
Every substrate must be well-cleaned, dry and free from grease and oil. Coating removal: Sand
Application
Stir or shake the product well for several minutes before use, if necessary by machine.
Application conditions
Recommended temperature for surroundings and product: +15°C-25°C. Do not apply below +10°C. Ideal surface and object temperature for application: +18°C-22°C. Avoid application in direct sunlight. Underfloor heating systems must be adjusted well in advance.
Maintenance
Initial and maintenance care: After at least 3 weeks curing time with RENSA FLOOR POLISH 4580.
Storage
Storage temperature is +5°C - +30°C.
Application methods
When renovating or coating exotic wood species, we recommend using RENO GRUND 3300.
Do not use on pear wood without a primer. Risk of film formation faults.
When using on dark woods please refer to the instructions in our VTM 5564 "White discolouration” in the areas around the joints of sealed dark wood floors.
| Volatile organic compound (VOC) | abt. 79 g/l |
|---|---|
| Theoretical spreading rate | 120 g/m²; 8.3 m²/kg |
| Density | abt. 1.02 g/ml |
| Drying time – dust free | after 2 hours |
| Drying time – through-dry | after 7 days |
| Clean up | Wash the equipment immediately after use. Water, VERDÜNNER 1000-98. |
| Colours | Colourless. |
| Safety markings | See safety data sheet. |
| Approvals & certificates | Swiss environmental label UE II, class C |
| Gloss value | 30 |