FEYSTAR AQUA 6600-05
Water-borne 2C sealing coating for floor coverings made of wood, cork, linoleum and PVC
- 2-component
- Water-borne
- Sealer
- 2-component
- Water-borne
- Sealer
FEYSTAR AQUA 6600 is a water-borne, highly flexible and durable 2C parquet sealing coating for floor coverings made of wood, cork, linoleum and PVC. The product is also suitable for renovating old coatings. FEYSTAR AQUA 6600 has a highly scratch-resistant, matt to dull matt surface that is resistant to light and yellowing. The slightly lightening effect as well as the matt effect of the coating which is independent of the viewing angle additionally emphasises the natural appearance of the substrate.
Technical data sheet
Surface preparation
Every substrate must be well-cleaned, dry and free from grease and oil. Coating removal: Sand
Application
Stir or shake the product well for several minutes before use, if necessary by machine.
Application conditions
Recommended temperature for surroundings and product: +15°C-25°C. Do not apply below +10°C. Ideal surface and object temperature for application: +18°C-22°C. Avoid application in direct sunlight. Underfloor heating systems must be adjusted well in advance.
Maintenance
Initial and maintenance care: After at least 3 weeks curing time with RENSA FLOOR POLISH 4580.
Storage
Storage temperature is +5°C - +30°C.
Application methods
When coating dark wood types (including exotic wood species) we recommend the use of RENO GRUND 3300. We recommend PLATIN 4545-30 as the first coating for dark wood types.
Do not use on pear wood without a primer. Risk of film formation faults.
When using on dark woods please refer to the instructions in our VTM 5564 "White discolouration” in the areas around the joints of sealed dark wood floors.
| Volatile organic compound (VOC) | abt. 70 g/l |
|---|---|
| Pot life | 2-3 h (+23 °C) |
| Hardener | Mix in hardener mechanically for several minutes. Comp. B: PUR 4545-99 |
| Theoretical spreading rate | 120 g/m²; 8.3 m²/kg |
| Density | abt. 1.03 g/ml |
| Mixing ratio by weight | 10:1 |
| Drying time – dust free | after 2 hours |
| Drying time – through-dry | after 7 days |
| Clean up | Wash the equipment immediately after use. VERDÜNNER 1000-98 |
| Colours | Colourless. |
| Safety markings | See safety data sheet. |
| Approvals & certificates | EMICODE EC 1 Plus,EN 71-3,Swiss environmental label UE II, class C |
| Gloss value | 5 |