FUTURA AQUA 3

Primer

  • Special adhesion
  • Water-borne

Water-borne, full-matt, alkyd based adhesion primer. For wooden and galvanized surfaces indoors as well as for wooden surfaces outdoors.

Suitable as an adhesion primer for wooden and building board surfaces as well as for non-rusting metal surfaces: doors, window casements, cabinets, mouldings, panels, panel ceilings, air ducts, radiators and piping systems. Outdoors FUTURA AQUA 3 is suitable for priming wooden window casements, doors, balcony rails, garden furniture etc. Indoors FUTURA AQUA 3 is also suitable for priming plaster and filler surfaces when the substrate must be especially durable and smooth: window sills and casings, and wall surfaces in special objects, e.g. staircases.

Technical data sheet

Surface preparation

Clean the unpainted surfaces from dust and dirt. Wash previously painted surfaces with RENSA SUPER paint cleaner. Matt down hard or gloss surfaces by sanding and thereafter remove the dust. Smooth any irregularities in the surface with SILORA A carpentry filler.

Application

FUTURA AQUA 3 is suitable as an adhesion primer for wooden surfaces indoors and outdoors as well as for zinc coated, galvanized and previously painted metal surfaces indoors. Before use stir the paint thoroughly. The paint is thinned with water 5 - 15 % by volume when needed. Apply the paint once or twice with a varnish brush, mohair roller, painting pad or spray. When painting a smooth surface, e.g. flush door, the marks left by a roller may be smoothed down with painting pad or with varnish brush. Airless spray nozzle 0.011 - 0.013".

Application conditions

The surface to be painted must be dry. During the application and drying period the temperature of the ambient air, the surface and the paint shall be above +10 °C and the relative air humidity below 80 %. Drying is faster in low air humidity and/or above + 21 °C. Application will be easier if air is humidified and/or temperature is lowered in the working space. Ventilation after the painting will quicken the drying.

Storage

Must not freeze.
Solids abt. 40 % by volume
Volatile organic compound (VOC) EU VOC limit value (kat A/d): 130 g/l. The product´s VOC: max. 130 g/l. EU VOC limit value (kat A/i): 140 g/l. The product´s VOC: max. 140 g/l.
Gloss Full-matt
Tinting system Teknomix
Density abt. 1.3 g/ml
Drying time – dust free after 1 hour
Thinner Water.
Clean up Wash the equipment immediately after use with appropriate detergent and warm water.
Packages White: 0,45 L, 0,9 L, 2,7 L, 9 L. Base paint 3: 0,9 L, 2,7 L, 9 L
Safety markings See Safety Data Sheet. NOTE! Because of the danger of self-ignition, any waste from the product, spray mist and soiled rags etc. are to be kept in a fire-proof place in air-tight containers. Immersion in water is also recommended.
Approvals & certificates M1 classification,Toy Safety Directive 2009/48/EC