RENSA FACADE

Facade cleaner

  • Wood-discoloring fungi resistant (Mold, Blue Stain)

RENSA FACADE is an efficient detergent for washing external surfaces of buildings and pre-treating surfaces before painting. It removes dirt, mould, algae growth and other impurities which may weaken the adhesion of the paint.

RENSA FACADE can be used on all constructional surfaces, which endure cleaning with water: wood, concrete, plaster etc. and old painted surfaces. Because the detergent does not harm the most common paint surfaces, it can be used diluted also as a maintenance cleaner. RENSA FACADE is a biodegradable product. It meets the requirements by OECD and by the Detergent regulation of European Parliament and the Council on detergents for biodegradability of all used raw material (OECD 301B, EC 648 / 2004).

Technical data sheet

Safety data sheet

Application

Wet porous surfaces, such as untreated wood, plaster etc., with water before applying the detergent. This prevents the detergent from absorbing too much and drying too fast. Apply the detergent to the surface to be cleaned by using e.g. a brush or low-pressure spray (so-called garden spray). Let it act for abt. 20 minutes. Enhance the cleaning effect by brushing. The detergent must not dry on the surface to be cleaned - wet the surface again with the washing fluid, if needed. Rinse the surface thoroughly with clean water. When using a pressure washer avoid excessive wetting of the wooden structures, such as weatherboards and outer walls.

Storage

Must not freeze.
pH 11
Dilution For washing of and pre-treating surface to be painted: 1 : 10 (1 litre of detergent to 10 litres of water). For very dirty/mildewed surfaces: 1 : 1 – 1 : 5. For maintenance cleaning: 1 : 15 – 1 : 20
Thinner Water.
Packages 1 L, 5 L
Safety markings See Safety Data Sheet.
Approvals & certificates OECD 301B, EC 648 / 2004