EPINOX WOOD PRIMER 12
Epoxy varnish
- Water resistant
- 2-component
- Solvent-borne
- Primer
Two components, epoxy transparent varnish, cured with polyaminoamides.
For priming of wood before top coating. Also suitable as a varnish for self-protection of surface.
Hard and flexible coating, with outstanding adhesion to surfaces.
Technical data sheet
Surface preparation
Fill cavities in the substrate using epoxy putty BOSMAN 1. Wash the surface with water containing OLIVA CLEANER - should be dry, salt-, dust-, oil- and grease-free. At the first layer of lacquer is preferably diluted by adding 20% Thinner 564.
Application
Airless spray, brush. Airless spray parameter - nozzle size: 0,33 - 0,43 mm, nozzle pressure: 10 - 12 MPa.
Application conditions
Minimum surface temperature: +5°C and at least 3°C higher than dew point, relative air humidity below 85%, good ventilation.
| Solids | abt. 40 % by volume |
|---|---|
| Volatile organic compound (VOC) | abt. 540 g/l |
| Pot life | 8 h (+23 °C) |
| Mixing ratio | 100:40 by volume (comp. A : comp. B) |
| Hardener | Comp. B: UTWARDZACZ 897 |
| Gloss | Gloss |
| Drying time – dust free | after 1 h |
| Drying time – touch dry | after 5 h |
| Thinner | Not recommended. When necessary use TEKNOSOLV 9506. |
| Clean up | TEKNOSOLV 9506 |
| Packages | Base: 0,52 l Hardener: 0,21 l |
| Safety markings | See Safety Data Sheet |