FUTURA AQUA 20

Semi-matt furniture paint

  • Wear resistant
  • Water-borne

Directions for use

Surface preparation

Clean new surfaces from dust and dirt. Wash previously painted surfaces with RENSA SUPER paint cleaner. Matt down hard or gloss surfaces by sanding and thereafter remove the dust. Smooth any irregularities in the surface with SILORA A carpentry filler.

Application

Wood, wood fibre board and building board surfaces as well as galvanized metal surfaces are painted with FUTURA AQUA 3 Primer. Rusting steel surfaces as well as aluminium and copper surfaces are primed with FERREX AQUA anticorrosive paint. Before use stir the paint thoroughly. The paint is thinned with water 5 - 15 % by volume when needed. Apply the paint once or twice with a varnish brush, mohair roller, painting pad or spray. When painting a smooth surface, e.g. flush door, the marks left by a roller may be smoothed down with painting pad or with varnish brush. Airless spray nozzle 0.011 - 0.013".

Application conditions

The surface to be painted must be dry. During the application and drying period the temperature of the ambient air, the surface and the paint shall be above +10 °C and the relative air humidity below 80 %. Drying is faster in low air humidity and/or above + 21 °C. Application will be easier if air is humidified and/or temperature is lowered in the working space. Ventilation after the painting will quicken the drying.

Storage

Must not freeze.

Special precautions

Special precautions

Technical data

Solids abt. 40 % by volume
Volatile organic compound (VOC) EU VOC limit value (kat A/d): 130 g/l. The product´s VOC: max. 130 g/l.
Gloss Semi-matt
Tinting system Teknomix
Density abt. 1.3 g/ml
Drying time – dust free after 1 hour
Drying time – through-dry after 2 - 3 days
Thinner Water.
Clean up Wash the equipment immediately after use with appropriate detergent and warm water.
Packages Base paints 1 and 3: 0,45 L, 0,9 L, 2,7 L, 9 L. NCS S 0502-Y 0,45 L, 0,9 L
Safety markings See Safety Data Sheet. NOTE! Because of the danger of self-ignition, any waste from the product, spray mist and soiled rags etc. are to be kept in a fire-proof place in air-tight containers. Immersion in water is also recommended.
Approvals & certificates M1 classification,Marine Equipment Approval (Module B)
Gloss value 38-46

Technical data sheet