WOODEX WOOD OIL

  • Solvent-borne

Directions for use

Surface preparation

Remove from the surface all loose matter, dirt and dust. Use RENSA TERRACE deck cleaner on surfaces to be treated, when needed. Rinse the surfaces thoroughly with water and allow to dry. Remove old paint or varnish layers before the treatment.

Application

Before use stir the product thoroughly down to the bottom of the can. The product must also be repeteadly stirred down to the bottom of the can during the application. Apply WOODEX WOOD OIL by brush, sponge or spray. Dipping can also be used. Renew the treatment according to the quality of wood until the surface doesn't absorb more oil. Wipe off possible excess oil abt. 30 min after the application.

Application conditions

The surface to be treated must be dry. The relative moisture of the wood must be below 20 % of the weight of the wood. During the application and drying period the temperature of the ambient air, the surface and the product shall be above +5 °C and the relative air humidity below 80 %.

Special precautions

Special precautions

Technical data

Solids abt. 30 % by volume
Volatile organic compound (VOC) The product is not included in the EU VOC directive.
Tinting system Teknomix
Density abt. 0.85 g/ml
Drying time – touch dry after 8 hours
Drying time – dry to use after 16 hours.
Thinner To be used without thinning.
Clean up The equipment is washed immediately after use with TEKNOSOLV 1621 (solvent naphtha).
Weather resistance For surfaces that are continuously exposed to weathering a renewed treatment is necessary once a year.
Packages Clear, brown and grey: 0,9 L, 2,7 L, 9 L
Safety markings See Safety Data Sheet. NOTE! Because of the danger of self-ignition, any waste from the product, spray mist and soiled rags etc. are to be kept in a fire-proof place in air-tight containers. Immersion in water is also recommended.

Technical data sheet

Other product specific documents